Insulating oils in many transformers contain ample amounts of polychlorinated biphenyls. PCB or polychlorinated biphenyls are formed by the high acid content and increased temperatures which in turn deteriorate the insulating qualities of the transformer oil. They are derived from biphenyl in which between one and ten hydrogen atoms are replaced by chlorine atoms.
PCB was widely used for commercial purposes between the 1930s and 1980s, of which transformer oils were one. They were banned in the 1970s through the Stockholm Convention on Persistent Organic Pollutants. Not only are they harmful for humanity but also equally dangerous for transformers by itself.
When left untreated, the transformer fails to function. To reuse the transformer oil, PCB content must be removed efficiently and reliably. Such reduction also conserves resources and enables safer disposal.
Why hering’s PCB removal system
Hering not only removes PCB contamination from transformer oil, but also restores the transformer oil to good as new state. Preceded by initial dehalogenation, Hering PCB-RS PCB dechlorination system strips chlorine atoms from other molecules and obtains PCB free sludge. Such waste can be disposed of as regular non PCB waste that leaves no footprint. Besides, the entire dechlorination is executed by Hering at a low operating cost.
Unlike electron beam irradiation which mandates high temperature, Hering PCB removal method requires a low temperature chemical process which employs dehalo alkali dispersion to chemically decompose PCB. A sludge which is free of PCB, dioxin and furan, is obtained through high speed centrifuge which is then processed through Hering EOK TORS or Hering TORS system.
The resulting transformer oil surpasses initial specifications of the input transformer oil. Hering system removes PCB contamination concentrations from 2000 ppm to less than 1 ppm in a single circulation. The recovery rates are more than 99 per cent while the operating costs are less than 0.15 EUR per litre.
Hering’s PCB dechlorination system comprises 5 modules which include degasifier module, sodium module, nitrogen module, mixer module and optional high-speed centrifuge module. In the degasifier module, water content in the oil is minimized to facilitate metallic sodium dispersion’s chemical reaction with chlorine atoms in PCB molecule. The sodium module manages and transports metallic sodium to the desired location.
The nitrogen module that follows, provides an inert nitrogen blanket over the chemical reaction and promotes the sodium dispersion’s movement around the system. The PCB content is neutralized in chemical reaction taking place in one or more tanks.
The reaction is complete in 20 minutes and the PCB free oil and sludge which is pumped to a vertical disk stack self cleaning centrifuge, where they are separated. The oil is dispatched for further treatment if required and the sludge is dumped as industrial waste.
Hering versus other PCB contamination removal systems
Besides the unbeatable German precision and century old expertise in processing transformer oil, Hering boasts of efficient and robust designs which are easy both to operate and maintain thanks to the high quality components sourced from Germany, West European and North American brand manufacturers.
Hering’s trademarked PCB-RS vacuum process technology is approved by United States and Australian Environmental Protection Agencies. Hering insists client involvement during manufacture and provides free training and its on-site service is coordinated by Hering and carried out by qualified partners.